Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,We are about to change our Internet Gateway Routers in our main datacenter. Now we have two C3945 as a Internet Gateway Routers and other two C3945E as Core Routers.We are evaluating the possible alternatives and we think that the ASR 1000...
Hi all,
I have encountered some weird behaviour in a Cisco router regarding the eigrp redistribution when I have static redistribution and static routes to Null0 at the same time. I will explain:
Some days ago I used routes to Null0 in order to adve...
Hi all,I tried to configure Flexible Netflow on Cisco Catalyst 3750-X stack with no lucky. I read the documentation and I assumed that we can configure the Netflow in all ports of the C3KX-NM-10G modules, that's right or only is possible configure Ne...
Hi allFrom some days ago we experimenting some management problems on C2960X stack. I see these strange messages on log:Mar 10 12:30:31.808 UTC: %XDR-3-XDROOS: Received an out of sequence IPC message. Expected 0 but got 4 from slot 2. -Traceback= 42D...
Hi all,I had to changed our WLC due a RMA. Now the APs don't join the WLC:spamApTask0: Mar 07 14:58:25.789: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:b3:da:37: Failed to create DTLS connection for AP 10:169:2:171 (15781).*spamApTask6: Mar ...
Hi Xander,
Thanks for your reply. I apologize if it is not the correct sub-forum to post my question. Maybe the forum description confused me:
Access troubleshooting, configuration, protocols, and technical resource topics on Cisco XR OS and Platfo...
Hi Joseph,I guess you are right: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3750-x-series-switches/white_paper_c11-691508.htmlI mistook the PN!
Hi,I'm pretty sure that the problem is due to certificate issue. The WLC config is OK (is the same than the old controller).I can't provide logs from APs because I haven't access to it I think I'll have to make a factory default (manually) on all AP...
