Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I downloaded cisco migration tool v 2.3.1. I started the cmt, i loged and when i want to connect on the asa 5510 with credentials in log i receive error windows error 10060, on the asa 5510 i set ssh on inside port of the asa and i set inside port li...
i configured anyconnect on my firewall the asa 5510 and all is ok, but i have a problem. the users from my local lan also connects on anyconnect vpn, but i don't want this feature. how disable local lan connects on anyconnect vpn on asa 5510?
in my company the users on workstations with windows 10 pro v2004 have a problem, previous version of windows workstations have not a problem. the cisco vpn client v 5.0.07.440 can not connect on remote access vpn on the asa 5510 firewall.in logs of...
i have l3 switch the cisco catalyst 3560g which has name "Cisco 3560g", like picture attached. i tryed that use vlan 1 on them for management of this switch from workstations 'dri-ns' and 'dri-pc' but when i tryed that teleneting on them i cant from ...
i have network like on picture. i configured ASA5510 with nat, access rule inbound on outside interface.i configured l3 switch cisco 3560x with vlan, dhcp server for every vlan, static route. I cannot access to internet from PC that is attached on l2...
the users from outside ASA 5510 are not from public networks(internet). those users are from the other networks of my company. the ISP is made tunnels from those networks over ISP router to outside ASA5510. my construction with VLAN90 from attached ...
As regards VLAN90, where the cable went from router to asa 5510 port which belongs to VLAN90 (is this posible?). this construction i would use that users from the others network can authenticating to active directory(VLAN70) and they use the other se...
