Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a MVPN setup in our MPLS lab. Multicast seems to be working fine on default mdt however, data MDT does not kick in when traffic exceedes the threshold, which is set to one. I have SSM setup in P and PE routers. For CE I just issued "ip pim sp...
I have a MVPN setup in our lab multicast seems to be working fine on default mdt. However, data MDT does not kick in even though traffic exceeded the threshold which is set to one. I have SSM setup in P and PE routers. For CE is just issued "ip pi...
We are using "router eigrp 1", however a fairly large sized company became our customer and they are also running AS1 on their EIGRP. 1) Can we both run AS1 and still maintain seperate routing table because their in address-family and we're not?2) ...
We have implemented MPLS-VPN and site-to-site connectivity seems to be working fairly well. However, we are having strange issue when trying to access the Internet. For some odd reason, we are not able to get to some sites such as ebay.com, latimes...
PPP learns /32 from the remote CPE and gets entered into the routing table as connected. If someone lets say, by mistake enters the same address in the CPE of another customer router wouldn't this cause an IP conflict? If so, how do I remedy this p...
On 2950 to configure for Cisco IP Phone is.-Command to trust incoming CoS setting only if a cisco IP Phone is connected?mls qos trust device cisco-phone-Command to trust all incoming DSCP settings for a traffic on a port fa0/2?mls qos trust dscp-Comm...
I have a streaming video that broadcasts to group address 224.5.1.1 and the receivers at the other end are able to join the group and get the feed. And also,I know default is working because when I issue "show ip mroute", for (S,G) G=default mdt's a...
I believe, "All routers" means every single router in the AS hence this makes iBGP the IGP for the network. Remember that synchronization forces the router to only announce what it knows about via IGP so by turning off synchronization it's living it...
