Evening - Curious if anyone can help with this: When using the NAC agent and a user enters there credentials, then enables the check box 'Remember Me' -  exactly where on a Windows system are teh credentials stored? Are they encrypted in any manner? Can the 'Remember Me' option be disabled? NAC server is 4.7(3) and agent is 4.7.x Thanks and Happy Holidays, Doug ... View more

Afternoon - Any documents / expertise with integrating a Junos EX environment with an existing Cisco 3-tier enterprise? We've aquired a facility that's mostly junos EX devices in a MSTP configuration and our current enterprise is Cisco RPVST+. We have layer 3 to our ISP, but want to bring this site into our environment without having to route through the Internet / firewalls ($$). I've read a few docs on this, would feel better if there was a reference guide or white paper on proper configuration. Any help is appreciated... deg ... View more

When a linux system boots, the 'root' processes typically attempts to mount network drives via NFS, prior to any user login on the system. In NAC, is it sufficient to add in the User Roles->Traffic Control->Unathenticated Role allowing TCP/UDP ports 111 & 2049 for the NFS mount process to work? We're using NAC v4.7.1 Thanks, Doug ... View more

Good evening - We are running NAC 4.7.1 and are preparing to roll-out an OOB deployment to manage our Catalyst switch ports for our wired workstations. We have our rules/requirements set up and working to check for Mac OSx, Windows-All, or Linux, and the associated role-requirements for each.Our question is: can you have a logical expression in a requirement to check the hardware platform type for Windows? We are starting to deploy WinXP and Win7 on 64-bit systems, but our requirements need to be modified to reflect the current 6 rules if it's a WinXP 32-bit vs the 3 rules that we can have if it's a WinXP 64-bit.ie -> If WinXP 32-bit check rules 1,2,3,4,5,6 but if it's WinXP 64-bit check rules 1,2,3 only. The rule differences are because the specific rule-based checks are software installation checks and not all of our software is available for 64-bit platforms There is a 'canned' registry check for the hardware platform type, but how does the logic flow? Thanks, Doug ... View more

Good evening - We are running NAC 4.7.1 and are preparing to roll-out an OOB deployment to manage our Catalyst switch ports for our wired workstations. We have our rules set up and working to check for Mac OSx, Windows-All, or Linux, and the associated role-requirements for each.Our question is: can you have a logical expression in a requirement to check the hardware platform for Windows? We are starting to deploy WinXP and Win7 on 64-bit systems, but our requirements need to be modified to reflect the current 6 rules if it's a WinXP 32-bit vs the 3 rules that we can have if it's a WinXP 64-bit.ie -> If WinXP 32-bit check rules 1,2,3,4,5,6 but if it's WinXP 64-bit check rules 1,2,3 only. The rule differences are because the specific rule-based checks are for software and not all of our software is available for 64-bit platforms There is a 'canned' registry check for the hardware platform type, but how does the logic flow? Thanks, Doug ... View more

Were upgrading our CCM cluster from v4.1(3) to 5.1(1) and the DMA tool continues to fail with an error stating Validation Failed - CAPF not migrated. - We do have CAPF configured / installed. How do we get passed this error? ... View more

We recently upgraded to v3.3(2) from v3.1. - When at 3.1, there was a document detailing specific MS services that should be disabled on the Pub and Sub to reduce processes and enhance security. - Does such a document exist for v3.3 (I have not been able to locate it on CCO)? Thanks in advance, Doug. ... View more

I have attempted the configuration (and several variations) of the tech tip http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_note09186a00800dea82.shtml to create a seamingly easy way for an administrator to transfer a call directly into their managers voice mail box, without ringing the phone. Does this approach work with CCM v.3.3(2b) and Unity 3.1(4)? Thanks in advance... Doug ... View more

We have Unity 3.1.5 environment operating as a stand alone Exchange Server in it's own site, but part of our Campus NT domain (for user authentication). On the clients Outlook, we added the Internet e-mail service (pointing to Unity as the pop server) and pass VM messages into Outlook via this method... - Is there anyway to keep the VM message as 'new' in Unity (so the MWI stays lite) even after the message has been passed from the Unity / exchange server to the campus Exchange server? - Or - is there a way to modify the clients Outlook to increase the delay before it checks the Unity for new messages? Thanks in advance, Doug ... View more