Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,If we have an IPSec tunnel established between 2 FTDs (tunnel mode). The tunnel was created via an FMC.If before been encrypted/encapsulated, packets were marked with DSCP values. Does the FTD copies the DSCP value to the outer header of the tu...
Hi,I have a switch 3650 with the IP base image IOS 12.2(25) SEE3, a polycom phone SoundPoint IP 430 SIP, A radius server IAS 2003 and a Windows XP PC.I enabled the windows XP pc for wired authentication ( started the service Wired AutoConfig, added t...
Hi,sorry for interference,If you like to apply the route reflector, it is one command on router R1: (I am not sure if your router R1 or R2 are route-reflector capable) but try this if you want on the router R1router bgp xxxneighbor IP_ADDRESS_RR1 rou...
Hi,Even if you peer R1-R2 and the link between R1-RR1 goes down, R1 will not be able to get any BGP updates coming from the Internet. Reason because R2 is learning updates from IBGP peer, will not propagate these updates to another IBGP peer ( IBGP ...
Hello Chris,i don't think it is possible to resolve it the way you are thinking about . Anyway, you can try the ip nat outside to translate the outside access to the inside interface, so that the traffic going to the email server appears as if it is ...
