you need to install TFTP Server in you laptop or PC such as TFTP64.exe. In that TFTP upload firmware that you need. Create a DHCP scope for IP phones and add option 150 to IP Tftp Server.
Put you IP phones in this vlan and observe that ip phone is do...
Hi Carlito,you need to agregate IP Phone that you want to monitor to RmCm User (Application user), in "Device Information/Controlled devices", and save. Let me know if this information could help you.Regards,Caosfox
Hi Carlito,have you completed the following steps ?1.- Enable in IP Phone (Span to PC Port)2.-You need to disable in CUCM>System> Enterprise parameter /Advertise G.722 Codec 3.- Connect PC to back site from the IP phone.4.- After install CAD in the...
