Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Recently, my AS5400XM started getting this status on some of my T1(I have DS3). I've worked with our vendor and they indicated it is a Cisco bug. We have never had this issue before until they migrated our system to a different switch. The problem ca...
we have a DS3 terminated to our AS5400. I was wondering if it is possible to do some configuration on it so that the gateway will reject incoming call with the same caller ID with any active call on the GW( this can be done via modifying the caller I...
I've created a script/service and have it running.application service test tftp://192.168.1.3/test1.tcl paramspace english language en paramspace english index 1 paramspace english location tftp://192.168.1.3/ Now I need to set up another language...
i have a few sip/h323 providers. I have also enabled sip/h323 on my as5400xm(this is for my asterisk server). Since i'm using these providers, i have to put their IP in my access-list. my concern is, since my gateway is accepting sip/h323 calls. what...
I’ve setup my AS5400 to send calls via h323 and SIP to some VOIP provider properly. It’s working ok, no issues. I can hear and talk fine I took it further and setup an asterisk to send SIP calls to my AS5400. I’m facing one way issue with this setup ...
I meant the ANI number. We have a dial-peer which accepts all incoming call which in turns will authenticate our gateway via ANI number. We have ran into several scenarios where there are multiple incoming calls with same CallerID simultanesouly. Th...
Yes I verified with the provider. They disabled imcp.I'm really at lost as what is needed to be done. I had debug voip rtp. But couldn't get much out of it.Any advices or pointers would be greatly appreciated.
call will come in via tdm pri -> gateway transfer call to a h323 server - > h323 server receives call and sends call back out to PSTNmy gateway and the h323 server are in different network. I dont have any control over the h323 server.Building confi...
