About Christian Faessler

Christian Faessler · 10-11-2017

Whats the max. number of APs per FlexConnect Group in AireOS 8.5 on the WLC 5508? It used to be 25 APs per FlexConnect Group in earlier code versions for the 5508 while the stronger hardware supported 100 APs. Has this possibly changed, and where...

Christian Faessler · 07-26-2017

Hi community, I am not able to find the radiation pattern of the two 1542 AP models. (I and D). Please let me know if this information is available. @cisco: This information would be useful to find in the data sheet of every AP. Thanks, Christi...

Christian Faessler · 03-20-2017

Hi there After working with Airmagnet and Ekahau for a couple of years I just discovered there is another interesting survey tool called iBwave Wi-Fi. Has anybody used this tool and would be able to share some thoughts about it? According to the iBwa...

Christian Faessler · 10-12-2015

Hi thereWe are using autonomous APs for customer site surveys and there is a thing that I never understood completely about the power settings and EIRP.My question is: What is the EIRP of the AP/antenna when I configure the interface Dot11Radio0 for ...

Christian Faessler · 04-30-2015

We are using AIR-SAP702I-E-K9 and AIR-SAP1602I-E-K9 in WGB mobile-station mode with EAP-TLS authentication and we are having serious connection problems with this setup.After a couple of minutes the WGB disconnects from the parent AP due to 'too many...

Christian Faessler · 01-29-2021

Hi Rasika I think I once also learned that multicast is transmitted at the highest mandatory data rate but current documentation says otherwise like the config example (https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81...

Christian Faessler · 02-06-2020

Hi Paul Have you ever managed to solve this issue? I am currently having the same problem with ISE 2.4 (Patch 10) and a 2960X with 15.2(4)E6. Cheers, Christian

Christian Faessler · 10-11-2017

Hello Sandeep Thanks a lot for the quick and clarifying reply. Now I finaly found the part in the 8.5 config guide where it says that 'A FlexConnect group can have a maximum of 100 APs on Cisco 7510 WLC, and 25 APs on Cisco 5508 WLC.' I couldn'...

Christian Faessler · 05-18-2017

Hi bhose I had not much time to evaluate iBwave. I realised that it gets more coverage in the industry though. We are using mostly Ekahau with good results and sometimes Airmagnet if needed which works pretty well too. Cheers, Christian

Christian Faessler · 03-21-2017

Hi Yosef Thanks for your feedback. We have just requested a trial version of the software and might have a try on it soon. Will keep you posted and still hope to get some more feedback from other peers. Regards, Christian

Member Since	‎02-22-2008 07:25 AM
Date Last Visited	‎08-25-2021 12:34 AM
Posts	42
Total Helpful Votes Received	9

User Statistics

User Activity

Number of APs per FlexConnect Group in AireOS 8.5

AP 1542 Radiation Pattern

iBwave Site Survey Software

power local vs. EIRP

WGB connection problem: Too many retries

Re: Data Rates

Re: ISE dACL downloaded, but not applied to port

Re: Number of APs per FlexConnect Group in AireOS 8.5

Hi bhose

Hi Yosef