Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Trying to build L2L VPN with AWS VPC. Run into problem at the Phase-2.local3.notice %ASA-5-713119: Group = xx.xx.xx.xx, IP = xx.xx.xx.xx, PHASE 1 COMPLETEDlocal3.err %ASA-3-713061: Group = xx.xx.xx.xx, IP = xx.xx.xx.xx, Rejecting IPSec tunnel: no ma...
I have a user who is able to use IPC when he is in the inside network.But when he is at remote lcoation and connecting via AnyConnect, thing doesn't work as expected.While the AnyConnect is up, he starts IPC and it is able to register to the Call Man...
Hi there,I read from this forum some discussion about the WLC VLAN Select feature.http://www.cisco.com/image/gif/paws/113465/vlan-select-dg-00.pdfI see that you can use this feature to have multiple VLANS (interfaces) to map to the same WLAN (SSID).W...
would any one like to share their opinions about the pros and cons between deploying remote access through SVC vs IPSec client? I have been dealing with IPSec clients for a few years. I just start to explore the WebVPN and SVC. Besides that SVC on...
If I want to assign specific VLAN to specific SSID (WLAN), do I have to setup the Wireless Controller (4112) running at LWAPP layer 3 mode? Any specific info or link for detailed documentation would be appreciate. I did spend a good amount of time ...
Hi maldehne,In your opinion, how many concurrent wireless users in a WLAN would you see it as "large enough" that you would want to break them down into individual subnets?And a slightly different question. In situation where there are multiple VLAN...
I am trying to setup vpn connection from Windows Mobile 6 (pda phone) to VPN Concentrator 3030 using the Windows native L2TP over IPSec. I setup the VPN Concentrator the way suggested on this page...<http://www.cisco.com/en/US/products/hw/vpndevc/ps...