sactoraymond
Level 1
Level 1
Member since ‎08-18-2004
‎10-09-2017

User Statistics

  • 32 Posts
  • 0 Solutions
  • 9 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
First Discussion
5 Discussion Posts
30 Discussion Posts
20 Discussion Posts
10 Discussion Posts
1 Reply
10 Replies
5 Replies

User Activity

Trying to build L2L VPN with AWS VPC.  Run into problem at the Phase-2.local3.notice %ASA-5-713119: Group = xx.xx.xx.xx, IP = xx.xx.xx.xx, PHASE 1 COMPLETEDlocal3.err %ASA-3-713061: Group = xx.xx.xx.xx, IP = xx.xx.xx.xx, Rejecting IPSec tunnel: no ma...
I have a user who is able to use IPC when he is in the inside network.But when he is at remote lcoation and connecting via AnyConnect, thing doesn't work as expected.While the AnyConnect is up, he starts IPC and it is able to register to the Call Man...
Hi there,I read from this forum some discussion about the WLC VLAN Select feature.http://www.cisco.com/image/gif/paws/113465/vlan-select-dg-00.pdfI see that you can use this feature to have multiple VLANS (interfaces) to map to the same WLAN (SSID).W...
would any one like to share their opinions about the pros and cons between deploying remote access through SVC vs IPSec client? I have been dealing with IPSec clients for a few years. I just start to explore the WebVPN and SVC. Besides that SVC on...
If I want to assign specific VLAN to specific SSID (WLAN), do I have to setup the Wireless Controller (4112) running at LWAPP layer 3 mode? Any specific info or link for detailed documentation would be appreciate. I did spend a good amount of time ...
Community Statistics
Member Since ‎08-18-2004 10:34 AM
Date Last Visited ‎10-09-2017 01:21 PM
Posts 32
Helpful Votes Given To