Hi all. I hope this is the right section to post this kind of question. Basically I need to know which switch should I buy to achieve the customer's needs. Each floor will have 1 x 2960 with 2 10GB uplink to the core switch. The problem is I don't kn...
Hi all.I'm currently troubleshooting a problem occurred 3 days ago by a customer.He has 4 switches (sg500) 2 and 2 stacked. They're connected with glas using 2 interfaces (PO) in LACP. Everything went fine until friday evening when the second pair of...
Hi all.I just upgraded to ASA 9 (asa 5510) with anyconnect 3.0.5080.I'm still in a test env so I can do what I want. I created one AnyConnect profile with a policy and an address pool (172.10.9.100 - 254 /24).I can connect with my test user with both...
Thanks for your reply.Honestly I prefer to use VSS instead of redundant cards.Both the 6500 and 6807 support VSS so the question is: 4500-x, 6500 or 6807?
Hi, thanks for your reply.Actually I don't see the need to use a Nexus for this. VSS between 2 4500-x achieve the same result and cost a bit less.I know VSS can be used only with 2 switches and the fact is I will have to connect these two 4500 to oth...
it works the telnet command is not the reason (it was for testing purpose), what I can't understand is why the log told me "failed to locate egress interface".Anyway, thanks for your great help!
Here's my config.I deleted some parts because are others StS vpn and are not relevant here.ThanksCryptochecksum: a7f11299 8da068a9 cfb62a50 4a9e3a5d : Saved: Written by reini1242 at 07:55:29.112 CEST Tue Mar 26 2013!ASA Version 9.0(2) !hostname cisc...
