I am building a typical OTV architecture (on a stick, not inline) on Nexus 7000s; the join and internal interfaces in my OTV VDC are using M1 card ports. Can the other end of those links -- i.e. the interfaces in my Agg VDC -- use ports on my F1 card...

I need to build a lan-to-lan VPN tunnel between two networks having overlapping IP spaces. I've looked at the config guide: http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml#diag ... but I am unable ...