Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I just completed an upgrade from CUCM/Unity v4 to CUCM/Uconn 8.6Apparently the customer was using a Unity call handler as a meet me attendant. The call handler still exists and attempts to function properly but never completes the transfer.The caller...
Ive got an odd issue with EIGRP. I've got two sites with 3750's configured as distribution switched, each site also has a 3845 with a DS3 connecting them.X.X.10.0/24 is configured on the site B distribution switch and show up correctly in the routing...
I've got a 3845 on IOS 12.4(20)T3 and there are two dial-peers configured as follows.dial-peer voice 80000 voip description Intersite Dialing via ITS-UCM02-PP destination-pattern 001.... progress_ind alert enable 8 progress_ind progress enable 8 prog...
I have Unity Connection 7 with a SIP integration to call manager and everything on my network configured to use G729. Unity Connection accepts calls and works fine for voice mail, but when it tries to transfer to an extension from the directory handl...
I believe you are bumping into this bug CSCub86298. I bumped into the same thing last night and the ultimate resolution involved TAC gaining root access and manually modifying an administrator account.
That is the correct file.And for licensing, you wait to register the PAK and install the license until after the upgrade other wise you will be working with TAC to rehost it after you upgrade to 8.6 (Versions after 7.1.5 create a hash value called a...
From lots of personal experience, in a cluster of that side, this is how I would break it down.Step 1 (during an evening maintenence window)1.Start the upgrade on the pub during the day but be sure to tell it now to reboot after upgrade2.At the start...
Apparently even though both Unity Connection and Meetme are using G711, this now requires a transcoder. Maybe meetme is using 722 now? Either way, configuring a hardware transcoder fixed the issue.
Restrictions table have an allow rule for the meet me numbers at the top and the call does leave the system a the beeps are heard in the conference when the caller attempts to join.
