Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello.My SFR module shuts down 10 minutes after module restart or appliance reboot. I have already done the following:- Firepower reimaging- other ASA software- ntp switched off and manually configured older date- extensive physical cleaning of the a...
Hallo.The ASA 5506-X has 4 GB of RAM and 2 GB of it is allocated to the FirePower software.This is too little, the MySQL database needs a lot, memory has to be swapped out to the swap partition.I don't need 2GB RAM for the ASA software.So how can I a...
Hi Guys.What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:- single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts- and a 3750x-stack with 100 local hosts + hsrp with a...
Hi there. That is probably the official answer. Unofficially or technically, it should be possible. When I was upgrading, I saw which scripts were running. Some of them concerned kvm attitudes. It's just a Linux system. But reverse engineering is not...
LAN / Voice-DMZ are historical caused; "WAN" / other DMZ are for public authorities and internet.
MRA and B2B; must be separated.
The LAN / DMZ's / WAN are separated by a 3rd party firewall.
I would like it for security reasons. At the moment the VoIP net is in a extra DMZ.
Video solution is in process of planing. Perhaps one VCS-C at the LAN, one VCS-E for the DMZ and one VCS-E for the WAN.
In your production we use several 3750X with this Software and within 3 weeks there are no cpu or memory nuts identifiable(checked with nagios every 3 minutes).
