About snguyen

snguyen · 08-21-2014

Hello,The ASA already configured snmp read/write. How to send an command via SNMP to an ASA5550 to change the configuration?? for example: no aaa new-model aaa authentication ssh console LOCAL Thank you

snguyen · 02-21-2014

Hi All,I am having problem when configure port channel on asa5550 IOS ver asa914-k8.bin also in ver 9.02 and 8.47.Please let me know how can I solve this problem.UK-LON-FW(config)# int port-channel 3UK-LON-FW(config-if)# vlan 245 ...

snguyen · 06-05-2013

Hello Everyone,I am looking for the best Console server to manage serial port devices.We are currenly using Cyclades ACS48, Lantronix SLC48; would you please give me your suggestion for a better console server? Thank you very much for your help.Samm...

snguyen · 01-25-2011

Hello Everyone,I have a Sun Server with two 1G ports and trying to connect with my Cisco 2960G on port G0/23 and G0/24 but I am having problem to ping between the Sun Server and Cisco 2960G Switches. Please let me know how to fix this problem, also ...

snguyen · 11-05-2010

Do you know other methods, to upgrade IOS to a Cisco router from a server by using FTP or SCP or other methode but not tftp (also server is not Cisco Router)?Thank you for your help.

snguyen · 02-26-2014

Hi Marvin,Thank you for your answer. I did everything but it did not work. Turn out it is a bug ver 8.45 will let you created the sub logical interface but actually it did not work right. Verson 9.x doesn't let you create more than 2 port channel ...

snguyen · 01-28-2011

Thank you Fabienne,Yes, I have to use LACP because Cisco interface with others mfg device. If Cisco interface with Cisco then I don't have to.The second question was How do you change admin and operation keys in the the Cisco 2960 (which commands)?E...

snguyen · 11-05-2010

Hi Jennifer,Thank you so much for your help.

snguyen · 11-03-2010

You guys rock....Both Chris and Leo suggestions work.Thank you so much for your help.Sammy

snguyen · 11-03-2010

Hi Leo,Per your suggestions, it works.Thank you very much.

Member Since	‎10-29-2001 09:34 AM
Date Last Visited	‎10-25-2017 02:02 AM
Posts	33
Total Helpful Votes Received	5

User Statistics

User Activity

How to send an command via SNMP to an ASA5550 to change the configuration??

ASA5550 port channel configuration ERROR: nameif not allowed on empty etherchannel interface

I need your help. I am looking for the best Console server.

How to Etherchannel between Cisco 2960G Switch and Sun using LACP?

Can you upgrade IOS to a router using FTP or SCP from a server (not tftp)?

ASA5550 port channel configuration ERROR: nameif not allowed on

Re: How to Etherchannel between Cisco 2960G Switch and Sun using

Re: Can you upgrade IOS to a router using FTP or SCP from a serv

Re: Question: Can you use the ACL extented in 2960G in same Vlan

Re: Question: Can you use the ACL extented in 2960G in same Vlan