I am trying to add AP 1042N with ios15.2(4)JB5 in WLC 2504 with IOS version 7.4.121.0 , but AP is not joining andBelow mentioned is the log I am getting in the AP , here 192.168.100.10 is WLC ip *May 20 19:31:22.745: %CAPWAP-3-ERRORLOG: Go join a c...
Document : CAPWAP encryption Using DTLS Central Data Systems Private Limited #50, 27th Main, I Cross, BTM Layout I Stage, Bangalore – 560068 Ph: 91-80-40454545 www.cdspl.com Access Point Communication Protocols In controller software rele...
We wanted to configure VPN in 2921 router and configure routing with BGP. I have installed evaluation license for DATA and SECURITY . But now we ordered only SECURITY license fro the router.For VPN we need Security license , but BGP will be enable...
Have you configured authentication in tunnel-grouptunnel-group <tunnel-group-name> general-attributes authentication-server-group <ldap-name>Please try below command and check are you getting ,AD group listingshow ad-groups <ldap-name>
Hi Thanks for everyone's comments, I found solution, I i was extracting only one file from the tar image and supporting files were not extracted to flashNow I did " “archive tar /xtract tftp://<TFTP server IP>/<ImageName>.tar f...
In this post we will see how to take configuration back up of WLCs using Prime Infrastructure. If you have multiple controllers, then Prime Infrastructure would be the easiest way to automate the WLC configuration backup at regular interval. I have u...