Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is an old question for an old firewall, but I've not found any definitive answer.I have found PLENTY of answers regarding the allowance of traceroute *through* a firewall.That is NOT what I'm asking.I need the firewall itself to perform the trac...
I have an odd situation involving two ASA firewalls.Firewall 1 is our main firewall, an ASA5585-X. Firewall 2 is an ASA5506For reasons that aren't germane to this problem, one of our research groups is required to place their server and its attendant...
I have a Prime Infrastructure installation that was set up over ten years ago, with C4900M and C3750X switches, 5508 WLCs and 3700 series APs.Authorization was set up against an ACS applianceOver the years, the only thing I've done is update the vers...
I have a flash memory problem with the master switch in a 3750X cluster of three switches.The flash memory of the master switch is either corrupted or out of commission.A "dir" or "dir flash1:" command results in "%Error opening flash:/ (Invalid argu...
I'm having difficulties getting 2 of my 3602i access points to re-register with their respective WLC5508 controller.The 5508 controllers are connected to a 3750X cluster in my server room.Each floor of my buildings have their own 3750X cluster.Each o...
Aloha all and thank you for your responses.This was a head-scratcher that became much ado about nothing.The ADSM has a tool menu that includes ping, traceroute and packet tracer.I couldn't get ping or traceroute to work.When I opened an SSH session w...
Aloha, ArefAs the firewall 2 configuration should indicate, there are access lists as you describe.Examples:access-list inside_access_in extended permit tcp object R640 object cdn.redhat.comaccess-list inside_access_in extended permit tcp object syno...
Aloha, ArefI've attached revised documents. Hopefully, that will help.The configuration that I shared was never changed. It's the configuration for firewall 2.The only configuration change was done on firewall 1, which consisted of establishing a sta...
Correct, the configuration is from the 2nd ASA.There is traffic allowed from our institution's private network (private network 1) to the server and NAS, but nothing that originates from the outside world.All traffic that traverses firewall 1 to the ...
