Are there any dependancies on VTP on the Nexus platforms like the 5500 or 7000? In IOS PVLAN required VTP Transparent mode however I cannot find any reference to this for the Nexus platform. Are there any other features that would require the use of ...

Hi - In diagram below would you use or not use IBGP between links from R1-R2 and from R3-R4 and should the link between R1-R2 or R3-R4 be L2 trunk link with VLAN on it for firewall failover and-or using IBGP between SVI. Tx

Hello, I need help with natting traffic and redirecting based on ports to another machine. In attached diagram I am trying to get traffic from source of R1 L0=1.1.1.1 destined to R2 E0 =10.1.1.2 port 80 to redirect to destination R3 E0=10.1.2.2 port ...

Hi, I am trying to understand PVLAN Behaviour when there is a trunk link between switches. I have read the cisco document linked below but still have a few Qs.http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/54sg/configuration/guide/pvl...

On a MPLS network when the physical interface speed is higher (100 Mb) and subscribed CIR is lower (50Mb) what qos settings need to be configured on Routers.Is Traffic shaping configured in inbound or outbound direction or both?Does it need to be imp...