Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
We have deployed a Cisco 899G router to a site that has two NBN (Ethernet) connections to the provider on Gig8 and Gig9.
The connections are stable until one goes offline after 1800 seconds when the interface tries to renew its DHCP lease wit...
Hi All,We have set up an AA. The AA successfully transfers to internal extensions however we have one transfer option that goes directly to a mobile - whena user selects this option it states "out of service". Does anyone have any suggestions on mak...
Hello,I have an issue whereby I have a Cisco 3750 stack and multiple gateways coming off this stack. Particular VLANs should use certain gateway so for this I have configured PBR and applied to the VLANs. When doing this though I have seen that inter...
Hello,I am exploring the possibility of having Cisco 1841's (or higher) at multiple sites. Each router will support 2 x ADSL connections (HWIC-1ADSL cards). My plan is to set up a DMVPN Full Mesh Tunnel on the first ADSL interface on each router and ...
Sorry about multiple posts, did not know which it applied to more so, anyway;Hi Guys,Basically I want to be able to have wireless users (laptops) connect to access points and authenticate them selves (most likely with a captive portal on their intern...
Hi John,
As I understand the ISP (Telstra) only offers DHCP though their RADIUS servers which allows them to control the authentication. I will ask the question today though to confirm as this would be a viable solution.
I'm still unsure why the DH...
Hi All,The solution was to add the full Internet range to the PBR, this leaving no deny statements.Regards,BenSent from Cisco Technical Support iPhone App
Apparently the way around this issue is to add all internet routes to the ACL only as follows, this seems to be working:ip access-list extended INTERNAL-to-FIREWALL-CUSTOMER-ACLpermit ip 10.150.0.0 0.0.255.255 1.0.0.0 0.255.255.255 permit ip 10.15...
Hi AB,Show proc cpu sorted | ex 0.0CPU utilization for five seconds: 45%/28%; one minute: 37%; five minutes: 20%PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 82 6122929 78343095 78 9.74% 6.91% 2.64% 0 HLFM ...
