Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We are currently doing labs with ACI. Does anyone know if it is possible to connect with the APIC through the infra tenant to another pods TEP (Pod2, 10.201.0.0/16 in our case) that is not the seed pod? It works fine in the seed-pod (Pod 1, 1...
Hello,
I am having trouble getting snmpset to work on our nexus 6k's, more specifically ccCopyEntry (http://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.9.96.1.1.1.1.&translate=Translate&submitValue=SUBMIT&submitCl...
Hi,We are using cisco SSL module in a 6500 chassi. When we are doing performance tests the ssl module adds alot of delay. Sometimes up to 1 second. When we are doing the same tests without the ssl module we are getting normal respons time.Is this nor...
Hi folkI got a quick case here where an operator want's a layer 2, ethernet, trunk link between two sites to be encrypted. The endpoints are Cat 6513 running SXF5. Is there some way to encrypt using IOS, a Catalys application module or do I have to l...
HiI'm planning to move to a newer WLAN controller and is currently running some trials with our some of our currently installed AP1010. The plan is to reuse the AP1010 and fill out the gaps with AP1130AGs. The AP1130AGs are joining the WLC2125 ok but...
Hi Alexander,Thanks for the answer!I see why your solution works and ours do not. I have tried getting it working in a couple of different ways by using secondary IPs for VPCs on the border leaf side and by connecting the BGP directly to the leafs bu...
Hi Alexander,
Were you able to find a soloution? We are facing the same design but with cisco ASA instead of Checkpoint. Where we want one firewall connected via VPC to each pod but we can't get it working however we do it. The best we have got so...
Hi Tomas,
Great work with the syslog in ACI!
Me and my colleagues just have one concern with the logging. We can't get "fraction of seconds" (%N in linux) remote logging to work in aci without manipulating the remote server and add timestamps as th...
