Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Ok so the order of events. Had a task to re-configure a 4331, it had an existing config and an older ios. As is my usual practice I backed up the config to flash just in case, with a copy command, giving no file extension. I then fttp'd the latest re...
This may be my first post so I'll try and make it a good one. Been struggling with this for a while now, I thought I was being clever by using Bridge Domain Interfaces to add a bit of resilience to this design, now this choice seems to have come back...
Hi all, my first post here. I've tried adapting the script from https://supportforums.cisco.com/discussion/12127976/crypto-generate-script (so thanks already to Joseph Clarke) but not had an awful lot of success. All I'm trying to achieve is a check ...
I too have used this cable method. Came up with it independently not long after passing my CCNA. Have used it in the field with no issues, at the end of the day you are just making a ring. As long as that holds true any cabling method will work.
Grea...
Also worth a mention is where has the delete command gone in rommon?rommon 8 > dir bootflash:
0 0 drw- lost+found
0 0 drw- .prst_sync
0 0 drw- .installer
0 0 drw- core
0 0 drw- .r...
Thank you Leo for your two detailed responses. Thanks to your pointers in the post I've marked as the solution I have successfully 'unbricked' the device.The 4331 has an integrated flash but it does have the port for the flash module shown in the fie...
Totally agree. Not something I ever do on my own projects. I work in a managed service environment and lead engineers often stray from our company policy on a client by client basis. Very frustrating.Could be a £5k paperweight now. 藍
Ctrl+C does nothing. Crtl+pause\break brings me to this;PASSWORD RECOVERY IS DISABLED.
Do you want to reset the router to the factory default
configuration and proceed [y/n] ?y
Router clearing configuration. Please wait for ROMMON prompt...Pressing...
