Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everyone,
Would anyone like to enlighten me about this latest SKU from Cisco? My SC is on holidays
I've just ordered it from CCW along with:
FPR2110-ASA-K9Cisco Firepower 2110 ASA Appliance, 1UCON-3SNT-FPR2110SSNTC-8X5XNBD Cisco Firepower 2110...
Hi,I have a question concerning EIGRP routing on a L3 switch behind a HSRP HA pair of routers which connect to a WAN.HSRP is operating as should be and when R1 fails, or an interface thereon, R2 becomes the active. All good.However there are now two ...
Hi,I have a funny scenario that I can't get my head around on a customer network. I ping from LAN [10.10.10.0/23] to LAN [192.168.1.0/24] whom both run off the same switch. But I get one echo reply and then TTL expired. I clear the ARP and same resul...
Hi,I have a 1900 router in a remote location with one LAN and two external connections A & B. Connection A is a wireless point to point back to HQ (layer 2)Connection B is a DSL running an IPSEC VPN back to HQ (layer 3)Connection A is the live link r...
Hi,I have built a site to site VPN (ASA1 to ASA2) which works. But!When the LOCAL network on ASA1 tries to access REMOTE hosts on ASA2 firewall, THAT HAVE STATIC NATs, to public IPs the traffic never gets returned back over the VPN. Basically the tra...
Although an old article you may convert 2100 with ASA to run FTD and use L-FPR2110T-TM-3Y.
Cisco ASA to Firepower Threat Defense Migration Guide, Version 6.2 Prepare the ASA for Migration http://www.cisco.com/c/en/us/td/docs/security/firepower/620/as...
I just bought this...
Within CCW there is the FPR2110-BUN that I selected!! Within that bundle I had the choice of hardware and I selected FPR2110-ASA-K9. Then the BUN asks to select the subscription so I selected L-FPR2110T-TM-3Y. That t me implies ...
Hi Alfred,Did you have any luck with this? I am having the same problem now.I started out using transparent mode to trial FirePOWER for a customer and came across a known bug [CSCus53126] that inhibits the traffic being sent to the FirePOWER module. ...
Apologies for slow reply. Unfortunately I have no access to the routing table to pull that information. I was working thru a 3rd party whom contacted me for advice.The issue is resolved but I still suspect something wtrange with layer2.
Hi Lei Tian,I have implemented this solution yet but speaking with others apparently crypto does take precedence over a static route.Is there documentation anywhere to prove this. I proposed the solution to the customer thinking the very same as you ...
