Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I've configured aaa TACACS in my router, the problem is when I do ssh to the router it is not accepting ACS password but logging in using local password.Also I can go to enable mode using ACS password. Please help in this aaa new-modelaaa authent...
Hi,When I check the logs in Cisco Nexus 7k, it is giving some STP logs for port-type edge enabled interface. Is this normal or is there anything to check on this.interface Ethernet8/18 switchport switchport access vlan 1234 spanning-tree port type...
Hi,I'm getting the below error in Cisco AP, due to this none of the clients are getting associated. What could be the reason for this?%LEAPCL-3-FAILED: AP Authentication to the WDS failed
Hi,I've l2tunnel configured to wards my neighbour through ISP. I'm seeing the tunnel keeps flapping. What would be tthe reason?interface FastEthernet0/0.230 encapsulation dot1Q 230 no cdp enable xconnect x.x.x.x 21 pw-class o2Wifiendl2tp-class class...
Hi, There is no local password configured in router, I think it is taking from ACS itself, but different password. Is there anything to be changed in ACS for this? Here is the output of sh tacacs Tacacs+ Server - public : x.x.x.x Sock...
Hi,I tried lot of times, I cant see anything in buffer.I can see drop count same as input errors and nothing in queue size. Input queue: 0/2000/2537/0 (size/max/drops/flushes); Total output drops: 02537 input errors, 0 CRC, 0 frame, 0 overrun, 0 igno...
Device connected to this port is WS-C6506. But when I give "sh inter switching" its showing drops in RP. Is this causing the issue?#sh cdp neighbors g1/5Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Swit...
