Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI have 2 servers, one active, the other standby, both will be using the same IP. If the active fails then a re-patch for the standby to make this the active.I undersatnd that i will need to clear the arp & maybe mac address table on the 6500 for...
HiI need to add another fast Ethernet port to an old 2621 router, can someone confirm if i need a NM-1FE-TX OR NM-1FE-FX-V2 ??looks like i need to source it from flea bay tho.cheers.
HiI have an IPS 4240 & IME V7.I was wondering how i can upload a new config file & save it to flash. I know i can just console on & copy & paste it in, but is it possible to upload the .txt file using copy tftp flash: or using the IME, or can i copy ...
Hii have a Ipsec tunnel between a ASA 5510 (Uk) & a router (France) that seems to be going down a specific times during the day. I have attached the sys log as well.I cannot seem to copy & paste the config onto here for some reason so i have attched ...
HiIt is an odd setup agree, if it fails at 2am, there are ops guys that can re-patch.The servers are located in different comms rooms, teaming can be done on the same server, but not on both?We tested the fail over & the server would not connect unle...
Only one server will be connected to the network at anyone time, it's not your traditional active/standby.The active is connected to the network, if that fails, the standby will be physically connected to the network.
Hithanks for the reply, ive been looking at Cisco site & indeed there are conflicting documents.If i get the NM-1FE-TX will i need to upgrade the ios? Its for a customer site, think they are running 12.3 (ahhhh)How come i will only get 10mbps?
Hi marcini have now got PFS enabled on the router as suggested yesterdaycrypto map SDM_CMAP_1 3 ipsec-isakmp description Tunnel_to_xxxxxxxx set peer 19x.6x.21x.10x set transform-set VPN-xxxxx match address 107 set pfs group2so now PFS is enabled at b...