Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,Please advise if cisco 877 is compatible for Site2Site VPN with Fortigate 600c?And second question is about my config. As first step I'm trying to setup 877 as NAT and DHCP. FA0 connected to a network with another DHCP router and the Internet...
Hi.Could you help me to setup cisco router 877 as DHCP relay to the server, so for example PC (VM on Hyper-V) from vlan 44 will get IP from DHCP scope 192.168.44.1/24Server has only 1 IP 192.168.10.30 and VLAN ID 10 (Hyper-V), but it has 3 DHCP scoup...
Hi guys,Could you advice is it possible (how if yes) to route to specific site through gateway which is belong to remote network (via Site-to-Site)?In my case: there are 2 networks (192.168.10.0 and 192.168.70.0) connected via site-to-site. My questi...
Hi guys,I'd like to allow 1 client to have public IP in local network. Currently we have few public IPs, but only 1 (a.a.a.a) is in use for NAT.What should I change in config and how to setup Client PC for public IP (what gateway should I put)?ip nat...
Hi guys,I'm trying to setup VPN client access for ASA5505. It's almost done, but I'm confused with new NAT rules from v8.3.VPN Client is able to connect, but no traffic after it. Client IP: 192.168.2.1-192.168.2.5Local net: 192.168.17.0/24Remote VPN ...
Perfect Hector,
First part of this task is completed and my Lab network which connected to Vlan 3 getting DHCP and internet access. Now I'd like to setup Site2Site with Fortigate, it has details as below:
Authentication: Pre-Shared Key
Local LAN:10....
Got it. Now I can receive DHCP response from any VLAN using Hyper-V VLAN ID. The working config is below:....interface FastEthernet0!interface FastEthernet1 shutdown!interface FastEthernet2 switchport mode trunk!interface FastEthernet3 switchport mod...
It's weird.interface FastEthernet2 switchport access vlan 44!interface FastEthernet3 switchport access vlan 44Laptop on FastEthernet2 getting DHCP IP for the server but for VLAN 10, like 192.168.10.100, not 192.168.44.100.Also with this settings DHCP...
Hi Blau,Thanks for reply. Still no luck. I've added suggested helper-address, but only Vlan 10 is getting IP from DHCP server.On port FA2 physical Laptop connected. On port FA3 - Hyper-V.interface FastEthernet0!interface FastEthernet1 shutdown!interf...
