About Nick Sinyakov

Nick Sinyakov · 09-11-2016

Hi guys,Please advise if cisco 877 is compatible for Site2Site VPN with Fortigate 600c?And second question is about my config. As first step I'm trying to setup 877 as NAT and DHCP. FA0 connected to a network with another DHCP router and the Internet...

Nick Sinyakov · 04-10-2013

Hi.Could you help me to setup cisco router 877 as DHCP relay to the server, so for example PC (VM on Hyper-V) from vlan 44 will get IP from DHCP scope 192.168.44.1/24Server has only 1 IP 192.168.10.30 and VLAN ID 10 (Hyper-V), but it has 3 DHCP scoup...

Nick Sinyakov · 06-18-2012

Hi guys,Could you advice is it possible (how if yes) to route to specific site through gateway which is belong to remote network (via Site-to-Site)?In my case: there are 2 networks (192.168.10.0 and 192.168.70.0) connected via site-to-site. My questi...

Nick Sinyakov · 04-16-2012

Hi guys,I'd like to allow 1 client to have public IP in local network. Currently we have few public IPs, but only 1 (a.a.a.a) is in use for NAT.What should I change in config and how to setup Client PC for public IP (what gateway should I put)?ip nat...

Nick Sinyakov · 03-07-2012

Hi guys,I'm trying to setup VPN client access for ASA5505. It's almost done, but I'm confused with new NAT rules from v8.3.VPN Client is able to connect, but no traffic after it. Client IP: 192.168.2.1-192.168.2.5Local net: 192.168.17.0/24Remote VPN ...

Nick Sinyakov · 09-12-2016

Perfect Hector, First part of this task is completed and my Lab network which connected to Vlan 3 getting DHCP and internet access. Now I'd like to setup Site2Site with Fortigate, it has details as below: Authentication: Pre-Shared Key Local LAN:10....

Nick Sinyakov · 09-11-2016

Hi Hector, Thanks for reply and clear explanation. I will try it this evening and let you know the result.

Nick Sinyakov · 04-15-2013

Got it. Now I can receive DHCP response from any VLAN using Hyper-V VLAN ID. The working config is below:....interface FastEthernet0!interface FastEthernet1 shutdown!interface FastEthernet2 switchport mode trunk!interface FastEthernet3 switchport mod...

Nick Sinyakov · 04-14-2013

It's weird.interface FastEthernet2 switchport access vlan 44!interface FastEthernet3 switchport access vlan 44Laptop on FastEthernet2 getting DHCP IP for the server but for VLAN 10, like 192.168.10.100, not 192.168.44.100.Also with this settings DHCP...

Nick Sinyakov · 04-11-2013

Hi Blau,Thanks for reply. Still no luck. I've added suggested helper-address, but only Vlan 10 is getting IP from DHCP server.On port FA2 physical Laptop connected. On port FA3 - Hyper-V.interface FastEthernet0!interface FastEthernet1 shutdown!interf...

Member Since	‎11-23-2010 06:25 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	79
Total Helpful Votes Received	3

User Statistics

User Activity

Cisco 877 with NAT and Site2Site VPN

Cisco 877 as DHCP relay to local server

Add route to gateway from remote (Site-to-Site) network

Public IP behind the NAT

ASA5505 v8.4(3) cisco VPN client setup

Perfect Hector,

Hi Hector,

Re: Cisco 877 as DHCP relay to local server

Re: Cisco 877 as DHCP relay to local server

Cisco 877 as DHCP relay to local server