We have recently deployed 9800 WLC in our network with IOS-XE of 16.11 Does anyone know how to enable the SSH access to the WLC from the wireless clients ? In Aireos , we had the command "config network mgmt-via-wireless". Thanks,Tamil
If I use the RSN technology such as 802.1x or PSK for wireless authentication , it is going to create the keys such as PMK and PTK etc for encryption and decryption of data frames. Then why do we need TKIP and AES algorithms to do the encr...
Users are unable to get authenticate when they connecte in extreme switches because of the below error
11051 RADIUS packet contains invalid state attribute.
For cisco switches it is working fine without any issues.
Whether ISE supports...
We are having 2504 WLC with 1042APs(2 spatial streams , 300Mbps) .Our clients are getting connection speed of maximum 72Mbps only in 2.4GHZ as well as 5GHZ
I have tried the below settings , but still the speed only
1.Radio policy all
We are having 2504 WLC with 220.127.116.11 code and FUS code of 1.0.0 . We would like to upgrade the code to 18.104.22.168 , and in recommedations i have seen that we need to upgrade the FUS code to 1.9( 1.0.20) .
Can I upgrade the FUS code dire...
I have tried the option of enabling band select feature , but soon some of the clients are unable to connect only. Hence i disbled the option again.
Pls fnd the output below, it consists of bgn , g , an client
(Cisco Controller) >show client detail...
Hi Naveen , One of our 6500 switch with sup32 has been reloaded automatically twice. And there were crashinfo files has been generated. In show version command output , the last reset was power on. We tried to use output intrepretor for crashinfo fil...