ATTENTION SPA112 and SPA122 UsersIf the Payton ATA is running a previous firmware before v1.0.1(16), it will be necessary to upgrade to v1.0.1(016) first before upgrading to the final release of v1.0.2(006).
Hello Dan,Firmware releases that have the "XU" designation in the filename are identical in every way with the matching firmware version except for the removal of the SRTP functionality. SRTP cannot be configured (from the web-based GUI) nor can it b...
Hello Dan,The Cisco SPA232D Mulit-Line DECT ATA is developed exclusively to use only the Cisco SPA302D Multi-Line DECT Handset.Although the development of the SPA232D has followed the DECT/GAP specifications and it may be theoretically possible to re...
Hello Everyone,We have now finalized our testing and we are now proceeding to post v1.3.1(003) as the official firmware release for the SPA112 and SPA122 ATA.The expected date of the firmware to be posted on our Cisco web site is Friday January 11, 2...
Hello Tom,Please open a case with our support center who can then provide the firmware to you.Information can be found at the following website:http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.htmlBest regards,-Lanc...
Hello E. Rentzow,You are most likely being affected by an issue identified in v1.2.1(004) firmware regarding three "Resync" parameters.Please refer to the following link for the resolution:https://supportforums.cisco.com/docs/DOC-26317Regards,-Lance ...
