Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have Cisco 1040 AP with new code 15.3.3-JAB. I would like to skip the guest user authentication and display only the web page disclaimer option for Guest.There is a option called web pass through from GUI and its working.How can i add custom page a...
Hello eveyone,I have ASA 5505 firewall with Security Plus license. As we plan to create disaster recovery plan for our client I had an issue with same IP schema.Current IP Schema:On ASA 5505 Info:LAN IP address: 172.20.1.xWAN Ip address: 1.1.1.1We...
Hello everyone, I have Cisco ASA 5505 Firewall with security plus license, Currently I open ports on 25,80,443 on public IP address 1.1.1.1 and perform static nat between the inside and outside IP address Such as i configured via CLIaccess-list OUT_...
Hello everyone,I have UC560 installed for one of our client. They would like to use paging feature of UC. I create a paging group on UC and able to page on the respected phones. They would like to page in larger area such as in parking lot, for that ...
Hello everyone,I have UC 320 installed on Site A and SIte B. Site A would like to call forward all calls to Site B. While call forward to site B from site A, no one has a physical access to Site A also i dont want to open remote access on my UC 320. ...
I did Configure NAT on both Firewall still not able to access network with NATed IP address.Can you please take a look at Configuration???Thank you!!!!
So far I get this far...Create Inside VLAN and DMZ vlan on both firewall and connect both firewall via DMZ, still not able access both networks via nated IP address.Firewall A ...
Hello,My both firewall has same Inside network as you exolain in previous exampleI have Firewall A has 10.10.1.x network also Firewall B has 10.10.1.x network not the 10.10.2.x....Also do i need to connect both firewall via DMZ interface????
Sorry for the delay response.Let say I have Prodauction Firewall as Firewall A and Additional Firewall as Firewall BFirewall A:Inside: 172.20.1.254Outside: 1.1.1.1DMZ: 192.168.1.1 with Security level 100Firewall B:Inside: 172.20.1.254DMZ: 192.168.1....
