Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What’s the root cause of this, if anyone can help? Cisco c9300 failed to boot - occurred the second time when we were doing a software upgrade. Just one switch failed out of 5 from the stack.Following was the boot information: Initializing Hardware....
How can we replace the spine hardware to N9K-C9332D-GX2B in cluster Version 4.2(7u)(Spine current version 14.2(7u)) since N9K-C9332D-GX2B ONLY supported from release 15.2.3 to release 16.1.1. Also we can not upgrade cluster to 5.X due current spine H...
Thanks a lot every for helping to check/TSIts working after ISP enabled the "MACSEC". BGP & all traffic was working before but now security also UPMKA Detailed Status for MKA Session===================================Status: SECURED - Secured MKA Ses...
Other side I cannot see due to AWS. but we need 8500. I see some issue which I know fragmentation work end to end. But with df-bit... MTU ping cant work with more the 1500. Debug just says "MKA Detailed Status for MKA Session=========================...
Thanks a lot. Here is the info. Cisco C9500-24Y4C: Version 17.12.5 (license: network-advantage (C9500 Network Advantage) (I tired many combinations on c9500/nexus9k. Other side is AWS direct connect with MACSEC option. BGP already up and working. in...