About colintaylor

colintaylor · 05-10-2013

HiI have an 887VA-K9 which boots into ROMMON mode every time.It seems to have 3 tries at booting, then fails.The entire console output from power-on is (blank lines removed):System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)Technical Supp...

colintaylor · 03-20-2013

HiWe have a Cisco 2811 running ITP IOS. On that router we run the SMPP service. A client on the network connects to this service, and we need to capture the traffic for debug.I've tried traffic-export, but I cannot see any outbound traffic.I'm gues...

colintaylor · 05-10-2013

Yeah. I think I fixed it now.Found that an alias had been set.$$ aliasr=repeath=hstory=?help=bboot=lsSo unaliased it$$ unalias boot Let's try booting again:$$ dir flash:Directory of flash:2 28443564 -rw- c880data-universalk9-mz.150-1.M2.b...

colintaylor · 05-10-2013

See the following - I'd have expected the unit to boot at this point?$$ dir flash:Directory of flash: 2 28443564 -rw- c880data-universalk9-mz.150-1.M2.bin$$ boot flash:c880data-universalk9-mz.150-1.M2.bin monitor: command "ls" not found$$

colintaylor · 03-21-2013

Thanks Adrian.That worked for me Thanks again,Colin

colintaylor · 03-21-2013

Thanks AlainI tried this out on my test 1841 running c1841-advipservicesk9-mz.151-2.T4.bin, and it seems to work, with the exception that I can only view the dumps on the console, the IOS doesn't seem to support copying to TFTP etc for viewing in wir...

colintaylor · 03-20-2013

Thanks Bilal.Capturing externally was something I had considered as a fallback for half the problem.The other issue is that the SMPP service also connects to a supplier over IPSEC - and that traffic is what we expect to be wrong. We would have to ex...

Member Since	‎01-02-2013 05:48 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

Cisco 887VA-K9 boots only to ROMMON

traffic-export capturing only inbound traffic

Cisco 887VA-K9 boots only to ROMMON

Cisco 887VA-K9 boots only to ROMMON

Cisco Configuration Professional 2.6 viewing problem

traffic-export capturing only inbound traffic

traffic-export capturing only inbound traffic