Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
We intend to deploy ASR-9010-SYS using DC power.
Day 1 hardware configuration typically consists of 2xRSP-880-SE, 2xMOD-160, FAN-V2. This configuration will grow in coming months and we may add 4x100G / 8x100G line cards to this router system.
W...
Hi, ASR9K platform now has 8 Port 100G Ethernet line card available. The datasheet for this line card is available on the below mentioned link.http://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/datas...
Hi Xander, In one of your forums, you mentioned RSP-880 (NP5) and other tomahawk based line cards are expected by this year end. I wanted to understand if the tomahawk based line cards (specially 4x100G) will inter-work with typhoon based RSP-440 on ...
Hi experts,How different is the implementation of MPLS-TE SRLG on IOS-XR in comparison to IOS.One of the prerequisites on IOS is that SRLG is only supported for backup autotunnels. Does IOS-XR supports SRLG for backup autotunnels? A configuration ill...
Hi experts,Could someone guide me towards configuration template for achieving MGO for VRRP.I have two ASR9006 connected to a there respective switch on a 1Gig link. The switches are interconnected and passing the VLANs.The 1Gig interface is configur...
Hello Nenad, You may also like to go through the below mentioned document.L2 Switching Configuration to XR L2VPN Configuration Conversion Processhttp://www.cisco.com/c/en/us/support/docs/routers/asr-9000-series-aggregation-services-routers/116500-pro...
Hi Sarmed, ASR-9010 equipped with 2 x RSP440's shall give you 440Gbps (full-duplex) per line card slot.The active-active switch fabric is enabled by default and no configuration is required to achieve the same.The 36 10G line card (A9K-36X10GE-SE/TR)...
Hi Aby,You do not require a seperate license to install/activate the sec PIE.Example: i you are running IOS-XR release 5.1.1, you just need to download asr9k-k9sec-px-5.1.1 PIE and install/activate the same. Post this you should be able to configure ...
Hi Nenad, This license is related to L3VPN functionality. Have you configured any L3VPN and associated any interface from desired location with that L3VPN VRF ?I have seen this on ASR-9010; until you create an L3VPN VRF and associate a physical inter...
