Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have a site to site VPN tunnel setup and the tunnel is up. I can successfully ping through the tunnel from device to device but when i try to pull up a HTTP page off a web server on one side of the tunnel, it fails.the ACLs are set to allow any IP ...
We have a remote office that is located on the 5-8 floors of a 12 storey building. We used to have a Linksys wireless router on each floor to provide guest wireless access. We recently replaced that with 5 1242 APs on each floor and connected those b...
we have a brand new ASA 5520 and i have a very basic config on it.. the issue i am having is after i reboot the damn thing, i am able to ping and traceroute through the outside interface for about a minute and then for no apparent reason, i cant hit ...
We used to have our closet switches (routed 3750s) talk OSPF to our 2 core 6509s.. we saw that the 2 port-channels we had configured load balanced the network traffic.. Last weekend, we replaced OSPF with EIGRP and one of our port-channels shows 95% ...
I have WCS 6.0 and under Administration -Settings - Guest User Settings, there is an option to automatically remove expired accounts. I checked that box and clicked saved.I had some expired accounts but those were not removed. Do i need to restart th...
I am sorry. we have 1242's and 1262's. we have two SSIDs (one for the 2.4 and one for the 5).. users are able to connect to the SSIDs but have horrible speeds (0.09mb down) from a 10mb internet link.. we checked the links and they are only 50% utiliz...