Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,we have an aging network with lots of gbic lx and zx,I wanted to know what would i need to test the signal power of my lx and zx gbic, this way I could plan wich of my gbic will need to be replaced.also, i have a 7201 with a glc-zx-sm module, the ...
Hi,I'm having a problem with the language translation for anyconnect.here's my setup:asa 5505asa version: 8.4(3)asdm version 6.4(7)anyconnect essentialsanyconnect webdeploy: anyconnect-win-3.0.5080-k9.pkgThe anyconnect client is deployed by the asa u...
Hi,I'm trying to implement a guest vlan.users in this vlan would only have access to interneti have created the acl, the user use an external dns, everything is working fine except for one thingwe have server in our LAN wich are published on the inte...
Hi,we have a 6509 with ios 12.2.33SXJwe have 2 WS-X6516-GE-TX, WS-X6516A-GBIC, and a WS-X6748-GE-TX with a WS-F6700-CFC daughtercardour sup is a WS-SUP720-3Bwe are experiencing packet loss for everything connected in the WS-X6748-GE-TX blade, right n...
Hi,we are trying to do an automatic backup of our switches config trough snmp.my script can easily backup cisco 2950-2960-3550-3560 using snmp.but I dont know the mib to use to backup the cisco small business serie 300 switches.if someone could point...
we solved our problem,for us this seem like a hardware problem, we contacted TAC and they replaced it no problem,we have not experienced the problem ever since.
I am unable to do those command on my 7201,maybe my IOS need to be updated, it is 12.4(12.2r)Talso for testing the gbic i guess i could use a fiber optic testing equipement, I will have to check if fluke make one, or if anyone could recommend a good ...
ok thank you that answer my question I will see how i can do it since my septup would not allow me to do it with one line i will have to put a static for each one of my server.thank you
Thank you for the quick replyif i understand right, if i have multiple web server in my internal network and they are nated to public ip, i would have to add this for my guest vlan to see them:for example:all server in 10.1.1.0/24server a: 10.1.1.100...
for exemple:my internal network is 10.0.0.0/8, my guest vlan is in this range however its default gateway is a layer 3 switch wich have an acl that deny it from accessing 10.0.0.0/8 and use external dns soo lets say i have a web server in my internal...
