Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to upgrade a customer to 9.1(2) CUCM and waiting for their UCS purchase. In the meantime I am trying to see if I can upgrade their subscriber at a remote site to 9.1(2). I am not sure how to determine if they have a MCS-7845-H2 or a MCS-7...
I think you need to disable digest authentication on the callmanager phone security configuration and on the 310 if you have it enabled there too. Once you do that you should be fine.
Keith,I never enable or modified digest auth and never wrote about that in my original post. I configured "digest user". Please refer to Screen shot 2010-09-09 at 11.04.49 AM.png from my original pictures. I did not configure anything more than what ...
Hey Keith,So you webbed into the 310 and configured the CUCM IP address on the username and password? And you configured the "end user" in CUCM the same as your are setting on the phone. That end user is placed on the phone config in CUCM as "digest ...
It works pretty well. I am using callmanager 7.0 and a linksys WIP310. I configured the phone in CUCM as an advanced 3rd party SIP phone. I also built an end user with the user id and password the same as the extension. I then edited the WIP310 confi...
