Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We found this page today on the Cisco website:https://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure-3-4/model.htmlIs there any new version of the Prime Infrastructure? Never heard of this and it seems that the down...
Hello,We need to purchase new wlc 8510. I know we also need to purchase only SFP-10G-SR or SFP-10G-LR transceivers. But we haven't any switches delivering such speed. I would like to know if the speed/duplex negociation will be possible if I connect ...
Hello, SInce we've upgraded our 8500 to firmware 8.0 (previously 7.4), the logs are filled with a lot of this message: DHCP Socket Task: Nov 18 09:05:02.792: #DHCP-4-IPRGSTR_MSCB_FAIL: dhcp_proxy.c:1938 Registering IP on mscb failed for statione0:94:...
Hi Experts!I've configured the Profile Threshold For Traps on my Wlcs on both radio (I'm interested in the client threshold especially), the setting is 20 instead of the default which is 12. I've also configured the snmp traps to be sent to the Cisco...
Hello,Using this document http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html, referring to table 4, I cannot see any version 7.6.130 for the wlc. My Prime is running version 2.0.0.0.294 and one of my 5508 wlc...
We've worked with cisco TAC yesterday and we're facing CSCur00288 : 8.0.100.0 client is shown with "ip address unknown" and "dhcp required".This bug will be resolved in WLC 8.1 which is expected to be released by the end of this year. Théo
Hi Holger,our 3600s are running Mini IOS Version 7.3.1.53From what I found until today, the predownload failed because of insuffisant flash size on the AP to keep both running and backup firmware...Regards
Hello RavsinghYes I know the meaning of the threshold. In my case I am able to see the threshold alarm when looking at the AP's alarms on the Prime but not when I launch the threshold violation report. If I can see the alarm on the AP, I take it that...
