Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day, I was hoping that something would provide some insight into Cisco NAT to help clear the air. Now there are a bunch of new NAT options that we have available since 8.3 and above. now can anyone explain how and when we use the following NAT ...
I have an 1841 router with software version 12.4.(19a). each time I try to configure DDNS on the router i get the messageoption 1 under the fa0/0 WAN interfacetestbed01#sh ip ddns upDynamic DNS Update on FastEthernet0/0: Update Method Name ...
I just recently changed the date format inside of the telephony configuration from the default of mm-dd-yy to dd-mm-yy, then I went to the ephone and reset/restart the ephone. now I see in the display screen that it flips between the proper date for...
Hello, we have a 1900 series router that is running CME and CUE. Now the end users are raising concerns that when they transfer a call from one phone to another they here 'transferring to xxxx'. on some phone they hear the auto attendant say "tr...
yes, the customer has recorded their name in voicemail.currently:inbound call => user selects the extension number and the CME says 'calling extension #'inbound call => user selects dial by username and the CME says 'calling person's name'our custome...
well it was for my home CCIE LAB where I didn't have enough memory on one 2611xm to run the 12.4 46 train (I had 90MB RAM, and the IOS needed 128MB)last question would be for the CCIE lab as per the Cisco 360 or InterNetworking Experts. I need two b...
okay then since my cable modem service is not connected yet, am I to assume that the E0 outside interface to the cable modem is also a straight or cross?
the only thing that comes across my mind on this whole experience is;1) why didn't the AP like trying to be upgraded using the MODE method when the IOS was on the tftp flash drive of my 3560 PoE switch?2) when we did the entire VLAN thing and I tried...
