About nn7963

nn7963 · 08-15-2014

We have just implemented a 5508 controller pair with MSE, Prime, and ISE. The system is working well, but I keep getting the following message in the log of the controller:[ERROR] apf_policy.c 3383: Could not apply interface override: source Overrid...

nn7963 · 01-22-2014

When I perform a show logg on my switch it shows a notification like the one below every 5 minutes:Jan 21 09:50:52.742: %SEC-6-IPACCESSLOGS: list 10 permitted 10.20.10.254 80 packets It is filling up my switch log. It is caused by m...

nn7963 · 11-07-2013

I have 2 servers MCS-7845-H2-ECS4 which each have 8 hard drives. the 4 hard drives on the left are not powered up on either server. The last 4 hard drives all have green power lights. Is this normal operation? I thought I might have a failed controll...

nn7963 · 08-15-2012

We have an ASA 5520 configured with Premium SSL VPN licenses. We've configured clientless and client based SSL VPN access. The VPN users are authenticated against a 2008 AD domain via a 2008 MS Radius server. My question is "can the users belong to a...

nn7963 · 01-23-2014

Thanks Steve, you're right it was the log statement. I appreciate the help!

nn7963 · 08-21-2012

Any thoughts on why the admin AD users can connect to client and clientless without being in the client and/or clientless AD groups with specific VPN permission?

nn7963 · 08-15-2012

aaa-server RADIUS protocol radiusaaa-server RADIUS (LAN) host 10.20.1.4 key *****aaa authentication ssh console RADIUS LOCALaaa authentication telnet console RADIUS LOCALcrypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec tra...

nn7963 · 07-09-2010

I fixed the problem on my CCM by going into enterprise parameters and replacing the hostname of the publisher in all of the URLs with the IP address of the Pub.

nn7963 · 07-09-2010

Go to Enterprise parameters and change the hostname in your URLs to the IP address of the Publisher. There are 4 URLs and you might as well change them all. Worked for me!

Member Since	‎08-04-2003 05:33 AM
Date Last Visited	‎06-06-2021 04:50 PM
Posts	13

User Statistics

User Activity

Could not apply interface override

Stop snmp polling notifications in switch log file

Unity Connection server MCS-7845-H2-ECS4 hard drives only half have power

SSL VPN RADIUS AD Groups

Stop snmp polling notifications in switch log file

SSL VPN RADIUS AD Groups

SSL VPN RADIUS AD Groups

Re: Phone Designer Error

Re: An unknown error occurred on your Cisco IP Phone