Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have a Call Manager 4.1 with a mgcp gateway. At the moment we have all users using a CLID of the main number. I wanted to have the majority of users sending their DDI number as the CLID and the remaining users sending the main number as thei...
Hello, I have a test pix that has developed a boot problem. When booting it displays the PCI Device Table and then hangs. Has anyone come across anything like this before and have any ideas what is causing this? Thanks, Andy.
We have a small network comprising 5 aironet 1100's and approx 30 users. The access-points are running IOS v12.3-4. The config is fairly simple with 128 bit WEP being the only security. All of the users have a problem with their connections to the wi...
Hello, The contexts are controlled by the individual devices and this is not centralised into the cluster features but if you're running muli-context you'll be an active/active load balanced cluster so it's a yes and no answer really. A bit more inf...
Hi, The high end models can be clustered for load balancing but you lose some functionality that you might still want to use. There is the security manager that might be better suited as you can deploy global profiles across pairs so you only change...
Hi Jack, As it was running before I'm guessing the active box has a correct configuration but it looks as though there is a problem with either the communication or the config going on to the standby box. Are they directly connected or is it through...
Hi Danny, Is the SMTP NAT on the Outside interface IP address? If so the SSL port will also be translated through to the server. If it is that way it's best to change the SMTP to PAT and that will allow the SSL service to run also.
Hi, Yep, if you only have the default rule on the Inside then it should allow the flow through to the DMZ and back. No need for an acl on the Inside, just wasn't sure if you had one other than the default or not. Would try filtering the logs to see i...
