About jose.ibanez

jose.ibanez · 02-03-2014

Hi,I have a problem with switch SF-300-24P and AIR-AP1231G-E-K9.The AP is working fine in a switch 2960 or 3560, and I want to move it to a new SF-300-24P.When it is plugged in SF-300, the AP never get boot up , it obtains power, and blinks its leds,...

jose.ibanez · 05-12-2015

Hi all, My problem was in "Device Pools". (I work with CUCM 10.5.2)Phone Settings > Caller ID For Calls From This Phone > Calling Party Transformation CSSSolved.

jose.ibanez · 06-20-2013

In ISO format:use POSIX qw( strftime );use File::stat;$fecha = strftime('%Y-%m-%d %H:%M:%S', localtime( $PRE_fecha ) );

jose.ibanez · 03-07-2010

Hi infoestrie,If you have hard problem to get the file, I could send you a link. Gave me a email.BR

jose.ibanez · 03-07-2010

Hi,I soved my problem by the same way,cisco TAC send us the file CP7925G-1.3.3.0.3.tar, I load in the 7925 and all the problems were solved.BR

jose.ibanez · 10-05-2009

Hi all,The 7925 uses a high UDP+RTP port (>16384) to talk to other phone 7925 or 7940.And I see that 7925 uses the port UDP port 2000 to RTP traffic, to talk to PSTN or CUE.When 7925 uses the high port there isn't any problem, no voice stutter, and d...

Member Since	‎09-27-2009 02:22 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

PoE on SF-300-24P to AIR-AP1231G

Hi all, My problem was in

CDR "dateTimeOrigination" conversion formula in Excel?

Re: Stoter sound CP 7925

Re: Stoter sound CP 7925

Re: Stoter sound CP 7925