About aslyuch

aslyuch · 01-21-2013

Hi,I have problems with setting the snmp retry / timeout parameters for our devices. I managed to import our devices with bulk import , but after it I realized that for some devices the snmp retry / timeout values were different ( created the bulk ...

aslyuch · 08-28-2012

Hi,I am seeing an increasing number of processes on our Solaris based Ciscoworks server. The parent and the zombie processes are the following:root@cw:/usr/ucb# ./ps -alxwww | grep 26915 0 101 14737 26915 0 0 0 0 Z 0:...

aslyuch · 11-29-2011

Hi,I am having trouble with gathering inventory for 7206 XVR devices. I got this error:RICS0001:Internal Error,unable to process the collected data from the deviceHow can I make the inventory work for these devices ?Thanks, AkosHere's an excerpt f...

aslyuch · 12-21-2010

Hello,I am using LMS 3.2 and I ran into the following problem:We have several 7609-S routers, and all of them are discovered with the wrong management (Loopback) address: Example:interface loopback0 / 192.168.147.136 is used for managementinterfac...

aslyuch · 12-12-2005

I am using LMS 2.5 / DFM 2.0 , with ~ 160 devices. My problem is that there are some events that remain active although they became obsolete. I tried to rediscover/delete devices, I reinitialized the whole DFM database, but these events continue to ...

aslyuch · 08-30-2012

I attached a screehshot about the Device Polling settings and also attached the DCRDevicePoll.log.Email notification wasn't set and when I tried to configure it , it was denied because the job was running currently.

aslyuch · 08-29-2012

The number of zombie processes is increasing constantly appr. at the rate of 3 proc. / 10 min. There are numerous unreachable devices in CS, that are actually reachable, so something is not working properly.

aslyuch · 11-29-2011

I forgot to mention that we use LMS3.2 with RME 4.3.1

aslyuch · 12-27-2010

Actually 192.168.150.1 was responding to SNMP and it caused all the trouble. I configured 'snmp-server drop vrf-traffic' and restarted the discovery process and all devices were successfully integrated into Ciscoworks.Thanks for your help, Joseph!

Member Since	‎08-29-2002 01:03 AM
Date Last Visited	‎04-04-2025 01:02 AM
Posts	9

User Statistics

User Activity

Prime Infrastructure 1.2 device snmp parameters

Zombie processes in LMS 3.2.1

RICS0001 error for 7206VXR

Device gets discovered with the wrong IP address

Alerts stuck in DFM

Re: Zombie processes in LMS 3.2.1

Zombie processes in LMS 3.2.1

RICS0001 error for 7206VXR

Re: Device gets discovered with the wrong IP address