Hello, I've set up EzVPN on ASA Version 9.2(4)5. My goal is just to use the VPN pool address (10.11.10.x) to access everywhere instead of using my laptop's real IP address. NAT is not needed on the ASA outside interface. I even didn't configure the i...

Hello,Please see the attach screenshot for the simple diagram.Area1 is configured as the OSPF totally stubby area. R1 and R2 are both the ABR's. So both of them will send a default route to R3. The design is not good but I can't change it at the mome...

Hi All, I have been struggling for some days and really need some help here. My PC (192.168.254.x) is on the same vlan with outside interface (192.168.254.171) of my PIX506E. When I launch the Cisco VPN client, my PC shows connected and gets the IP o...

Hi All, I'm using CiscoPI2.1 to backup the devices' configuration. I'm trying to find out the exact path where those configuration files locate. I ssh'ed in, changed to root. Under directory /localdisk/tftp, I can only find configuration files for s...