Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all. I have a CIVS-MSP-4RU I'm trying to restore to factory defaults with a 6.3.x recovery disc. I create my partitions per
https://supportforums.cisco.com/discussion/11750216/factory-restore-recovery-dvd
and then run the factory. However,...
Hi All. I have a hub and spoke topology where there's a L3 switch with multiple L2 switches trunked to it. Also, there are several VLANs in use.
For the L3 switch I have
ip multicast-routing
ip pim rp-address 1.1.1.1
each vlan
ip pim sparse-dense...
Hi all. Recently I've had multiple drives fail on a CIVS-MSP-4RU. Its occurred about 4 times and each time I've removed or placed a drive elsewhere and did a factory default and then got to VSOM/VSMS 7.5.1. After getting everything up and running,...
Hello. I'm running VSOM/VSM 7.5.1 on a single server. If I go to Server Backup through the Video Surveillance Management Console both "Media Server" and "Operations Manager" are checked (see attachment). However, the filename only indicates vsms.....
Hello all. Is it possible to run a debug or create and ACL to see which packets are going to the CPU as opposed to being handled by hardware? On the switch itself I only have two ACLs one for vty access and the other for snmp access. Moreover, I'l...
Thanks for the feedback. The issue turned out to be a bad drive slot on the chassis. I'm no BIOS or Linux guru so it took me a certain error message upon trying to install SUSE Linux to figure that out. So the drive would appear in BIOS, but it wa...
I'm unable to verify the recovery ISO as I'm using disc(s) on hand. And......can't download from Cisco Support due to maintenance not being kept on the equipment.
Something I noticed this time around for a factory restore is that even after having ...
Thanks Reza. I had come across a recent post that also gave a good explanation.
https://supportforums.cisco.com/discussion/13236621/ip-igmp-static-group-and-igmp-join-group-configurations
Raghav,
I'm not sure of the instance or what makes the server reboot, but when I'm physically at server I see (see attachment). I tried importing the foreign configuration and rebooting but neither work. If I continue it just says "No Operating Sys...
