Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I recently did the following configuration changes on my ASA through ASDM. The changes were the following:Added a new service policy to the ASA inside interface to do some traffic policing. Also put the global policy rules in the inside policy.The bo...
Hi ALL,In our setup we have WiSM modules installed on cisco 6506-E, ACS 5.3 virtual appliance.We are trying to implement EAP-FAST for our Wireless using WPA/WPA2 802.1x on the WLC side.I have followed the instructions in the following document step-b...
When I try to Launch Topology Services from windows 7 client I am getting the following error message:Cannot connect to ANIServer: ANIServer7.0-CCADLMS001Attached is the screenshot for reference. Also attaching the SC QUERY and SYSTEMINFO files.I hav...
OLD Setup:The old router with one Fa0/0 interface is connected to a switch. There are two subinterfaces made on the routers fa0/0 interface which have the following configuration:interface FastEthernet0/0 description Connected to hub no ip address no...
Hi,I am trying to add devices (1 4506E and 2960G)to RME in CWSNMS both through the Admin->Essentials->Inventory->Add Devices and by adding it to Whats Up Gold and then exporting it to Essentials. But both the time I can see the devices in the invento...
Hi Jouni,Thanks for the reply. I am really not sure about the significance of the last digit. But we upgraded the ASA some time back from 8.4.(3)8 to 8.4(4)1 to mitigate some security vulnerabilites released by cisco at that time.Regards
Found the following from cisco website http://www.cisco.com/en/US/products/ps6121/products_tech_note09186a0080aaeff5.shtml#prblm14Problem: ASA network objects get deleted when using ASDM version 6.4.5 While editing an existing network object using AS...
Hi Jouniforss,Thanks for the reply. I already have this feature enabled. That is how I posted the commands sent by ASDM in my 1st post. access-list inside_mpc line 1 extended permit ip object Guest.Wireless any access-list inside_mpc line ...
Hi Jcarvaja,Thanks for your interest.Actually most of the nat statements removed included general nat statements, nat object rule both static and dynamic having nothing to do with the inside interface at all. lines removed were independent of the ins...
