Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,There is wan optimization requirement from one of our client. I do not know much on WAAS. only waas product i know.What kind of queries we needs to ask to client to gather the existing network/servers data.e.g.WAN bandwidth,Servers deatils...any o...
Hi,What would be the benefits for proposing L3 switching in LAN-campus.Say suppose... there are 4 floors in a building with L3 switches of 4500 series...All users connects on 4500 series switches and these switches are connected to Core with 10G upli...
I have connected this particular 4510R switch to other access swtiches in ring topology.To complete this ring, i have connected one 10G of SUP-1 in slot 1 i.e 1/1 and another link on 2/1 on SUP-2 to complet Ring topology.But whenever i check show int...
Client is having following setup:1. 3 floors2. each floor is having 4500 series switches 2nd-4th floor3. 2nd floor is having core switch 45104. all 4500 series switches is having IP base IOS image5. All are connected to each other in Ring topology wi...
Hi Abhijit,Thanks for the prompt response.1. Client is having 4 mbps of two MPLS links2. Optimization between Two Data centers IDC1 & IDC2.What kind of queries shuld i send to know below details as you said:3. Applications to be optimized 4. TCP conn...
Thanks Amit,My current IOS is Version 12.2(31)SGA10. Does this IOS supports as you said earlier...If i do not use "hw-module uplink select", i think it should not show inactive because by default two 10GE in dual sup shows active.or i will have to us...
there are four switches in Ring Topology....starts with 4510R and ends with 4520R...From where it starts tat is connected on SUP-1 V-10GE port number 1/1 and Ring completes with SUP-2 V-10GE on port 2/1.In this case 2/1 should be active as per my kno...
