Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have built a Complete wireless network at a Hospital. We are using the HP tablets..We have Dell ABG cards in them..>We are using PEAP. If we are already powered up and running and want to access the network via wireless..no problem..However, if the...
I have configured PPTP on the PIX to allow a remote user connect.>Everything works great,except the remote user cannot Browse the Internet with his PPTP pool address..I am doing only local authentication..DO I need to disble NAT 0 for them to talk on...
Is there a documented patch or issue with the MCS servers rebooting running 3.3....I have two MCS 7825's loaded with 3.3 that are rebooting periodically on their own....Thanks for the input
Ok..By placing the certificates for Machine authentication into the local machine store I can get machine authentication....When I type my name/password and domain...it takes off like ts going to run the login.scripts kick-off.etc, but when everythin...
Hello Well I have tried to do this..and it does not work. I cannot login to the domain from power up, it will not find the Domain....I have inserted this piece of info from the Cisco website..I see no way to do Wireless login across the domain at pow...
Sounds exactly like what I am going through...thanks.....So the machine itself will have to become part of the domain....Is that from an IP persepctive or just hard coding the MAC..
Steve I too have the same issue..Is there not away to enable PPTP tunnel users to browse the WEB at the Main Site...Can't we just allow the pool'd addresses the opportunity to NAT for an HTTP 80 session...
Gilles The Cisco WEBSITE, indicated that STICKY commands would not be effective behind a Proxy server...Here's the config It looks simple enough, sounds like somehting would bind these Sessions to the Real server required, but the client is still...
