NM-HDV2 Network Modules

[dandawson]

Can I use the NM-HDV2 for the DSP FARM....like the old NM-HDV-FARM-C36.....

[maharris]

It sure looks like it, here is excerpt from the module Q&A:

The NM-HDV2 is the IP Communications high density digital voice network module. It supports a single Voice/WAN Interface Card (VIC/VWIC) slot that can be fitted with a digital (1-port or 2-port T1 or E1) VWIC or an FXS, FXO/CAMA, E&M, DID or BRI Voice Interface Card (VIC). It also contains 4 PVDM (Packetized Voice DSP Module) slots. The PVDMs are used to support voice channels and/or DSP farming (conference and transcoding).

Whole doc is here:

http://www.cisco.com/en/US/partner/products/hw/modules/ps5365/products_qanda_item09186a00801f9106.shtml

[dweiner]

You need to use 12.3.8T for this.

[maharris]

Also, they can only go in certain platforms -

2600XM, 2691, 3725, 3745. They are NOT supported in the 2600 or 3600 series boxes.