Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Why can't Cisco catch up and do this? It is such a simple concept. Aruba, Ruckus and even Ubiquiti can all do it. I don't mind running a Radius server but dot1x is not suitable for many environments. We have events where 5000 people turn up on first ...
Hi, I am using FreeRADIUS to authenticate users on a single SSID. I can allocate them to particular VLANs etc. What I would like to be able to do is to allocate the users specific QOS bandwidth limit overrides. This should be possible and I can find ...
I have a 3650 which I am trying to upgrade from a TFTP server on the same LAN. The tftp is used to automatically back up the config using archive commands so copying from Cisco to TFTP works all the time.
When I try to copy from TFTP to the Cisco I...
Hi,
I am new to VPLS. I am trying to test VPLS in the lab initially. My set up is extremely basic at present.
CE1 (3560CG-8) ---- PE1 (3850-12XS-S)----PE2 (3850-12XS-S)----CE2 (3560CG-8)
I have followed the instructions on the following Cisco c...
I help manage a WISP network which has a Cisco 3750 at its core and a couple of Cisco 7200 routers to two separate ISPs. We have configured public and private VLANs. The infrastructure is based on point to multipoint links with cisco SG300 switches a...
Hi. Thank you for your reply. I forgot to include Meraki in the list of alternatives. It is not much help when you are heavily invested in Catalyst. We have over ten controllers and 500+ APs. We use catalyst for many reasons that Meraki doesn't cover...
I have managed to figure most of this out....The freeRADIUS dictionary.airespace file did not contain definitions for the values I was trying to apply which is what was causing half of my problems. I have added those definitions so my file looks like...
it turns out that my issue was due to not using loopback interfaces. Although that is not specifically mentioned in the document. It is essential for it to work. I hope that helps someone else!
Just to add to this. I have read a lot of information about HSRP and having to synce CAM and ARP tables. I am not using HSRP and in this case, the second 7200 router is connected to a different ISP and operates completely separately.In light of the i...
