Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to upgrade one of my foreign controllers to 8.3. Is it safe to keep the anchor controller at 8.0? They are in production so I don't want to take any risks.
/Tomas
My customer wants clients to prioritize Webex traffic on one single SSID over all other traffic. I didn't know you could do that.
You can define Gold, Platinum etc on different SSIDs but to get AP to analyze traffic types doesn't seem possible. Webe...
Hi, I was planning on using Flexconnect for access to local resources on multiple WLANs/VLANs. I connect an AP to a trunk port with Native VLAN 600. The AP is configured as a Flexconnect AP and under the Flexconnect tab I configure the Native Id and ...
Here's a weird one. I have 3 industrial machines with the same hard coded IP address, 10.255.10.10/24. I need 3 different laptops to communicate with it's respective machine through a 2504 WLC. On the switch it's not a problem, I configure VLAN10, VL...
So, was there any solution to this? I'm having the same issue right now on a 5508 7.6.130.0. The WLAN has no anchors associated to it and I still can't delete it. I tried to add an anchor and delete it again to no avail. /Tomas
Thanks for the quick answer. VLAN 608 is allowed on the trunk and when I connect a PC to an access port on VLAN 608 I get an IP from that subnet. Seems like everything is correctly configured. At least now I know I didn't miss anything on the WLC set...
