Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there I have a new C2960X that we are replacing a couple old ones with.I can not get RADIUS working . yes the switch can ping the radius server .. i took out the key but it is there HELP I have it programmed like thisaaa new-model!!aaa group ser...
Hi there Is it possible to force a restart to the supervisors while connected to the standby cold sup?I am connected by console cable, and its at a second location. I updated the IOS and retarted everything and now the sup that i was conencted too ...
Running into a proble, we just purchased some 4500E switches with 2 supervisors.I can not get SSh working to allow connection so we can SSH in to do programming. i have given it anIP address..assigned the domain aaa new modelcrypto key generate rsa a...
I was making a change to the master in the stack and went to reboot the system, but only rebooted the 1 Supervisor , 4500E . now its in standby mode. is there a way to reboot both supervisors through a command on the standby switch. I am remote, and ...
I upgraded a C2960X-48-FPS-L switch to the latest IOS and get this error. I uploaded different IOS and same error. I factory reset the device and same error. POST: ACT2 Authentication : BeginPOST: ACT2 Authentication : End, Status Failedextracting f...
i figured it out. aaa new-model!!aaa group server radius RADIUS_AUTHserver 172.20.253.222 auth-port 1812 acct-port 1813!aaa authentication login networkaccess group radius local enableaaa authorization exec default group RADIUS_AUTH local if-authenti...
hi there yes i see in the access list 99 the ip address of my laptop thats trying to connect... but i did remove it from line vtp 0 15 and still no luck.i gave it a host nameso i gave it an IP address (vlan 1)ip domain-name I added it to vtp (got a...
since this is a new piece of equipmwent, i do not want it to manage all SSH to the switches that are currently on site. I just want to be able to connect to this 4500 so my boss can start to program it
